Compressed Air Pressure: 0.7-1.3MPa(7Bar-13Bar)
Oxygen Capacity: 100Nm3/h
Oxygen Purity: 93%±2%
Outlet Pressure: 0.5Mpa or per requirement
Dew Point: ≤-40℃
Electrical Power :380V/3P/50HZ or Customized 
  
PSA ( Pressure Swing Adsorption) Technology a revolution in Non Cryogenic Air Separation and Oxygen Generation Technology uses special grade of ZMS ( Zeolite Molecular Sieve).

The compressed air is passed through a Twin Tower PSA module interconnected with automatic change over valves. After passing through a Refrigerated Dryer air gets dried. Dried compressed air will now come in contact with bed of Zeolite molecular sieves (ZMS). Zeolite Molecular Sieves are special grade of adsorbent which have the property of preferential adsorption of nitrogen molecules. At a time one tower remains under nitrogen production cycle, whereas the other tower undergoes regeneration which is achieved through depressurization of the tower to atmospheric pressure. The outgoing oxygen gas is sent to a surge vessel where the minimum pressure will be maintained with the help of Back pressure Regulator.

Get quotes now!!!

1. Listed brand air compressor;
2. Germany Siemens PLC intelligent control;
3. Schneider electrical components, fast response time and long life;
4.7 inch touch screen human-machine interface, easy to operate;
5. Solenoid valve adopts Taiwan Airtac brand, the equipment long-term stable operation;
6. Automatic start and stop, automatic emptying, automatic start and stop after the rapid provision of qualified oxygen;
7. Pneumatic valve and pneumatic valve connection pipe are made of stainless steel, low cold resistance;
8. With activated carbon pressure vessel filter, better oil removal effect;
9. Large equipment using cylinder compression device, to prevent the molecular sieve powder, to improve the service life;
10. Increase the flame arrestor, fire hazards are guaranteed;
11. The equipment is marked with pipeline and reading door according to international standard, which is convenient for management and maintenance.

Translated with www.DeepL.com/Translator (free version)

Get quotes now!!!

1.Does one machine can only produce one size? 

Not exactly, it depends on the machine.

2. Do you have after-sales support?

Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.

3. How to visit your company?

We can pick you up from Shanghai or Hangzhou airport. Or railway station Shaoxing North. 4. What can you do if the machine is broken? 

Our machine’s warranty period is 12months. if the broken parts can’t repair, we can send the new parts to replace the broken parts, but you need to pay the express cost by yourself. if after the warranty period, we can through negotiation for solving the problems, and we supply the technical support for the whole life of the equipment.

5.Can you be responsible for transport? 

Yes, please tell us the destination port or address. we have rich experience in transport.

6. You are a trade company or factory? 

We are a Manufacturer.

7.Why your price is higher than others?

As we persist on that each factory should put quality in the first place. We spend time and money on developing how to make machines much more automatic, accurate, and high quality. We can make sure that our machine could use more than 20 years without any problem.

8. Do you have overseas engineers? 

Yes, we not only provide overseas engineers but also provide technical training.

9. Do you provide customized? 

Sure, we can design the equipment according to the data of the structural section you provide. We are a professional sheet metal forming machine designer and manufacturer.