What do you think is important for machine and equipment? You may consider the operation by using correct as the first important thing. It’s true. But the follow-up maintenance is also critically important. Unfortunately, few of you pay attention to equipment maintenance, so problems often occur after a period of time or equipment’s service life is reduced. As a result, you must keep daily maintenance of your equipment in a proper way. Maintenance methods may wary in different equipment. Wuxi Hail Roll Fone, a China top 10 non-woven spunbond fabric making machine manufacturer, explains to you how to perform routine maintenance of your spunbond nonwoven fabric machine.
Too much moisture or oil should not enter non-woven spunbond fabric making machine. In order to avoid failure, shorten the service life of the cylinder barrel, and ensure dry and clean air, check the oil amount in each inner cup of converter for sufficient if possible, push the pressure relief valve if it’s in the back end after not being used for a long time, turn off the power switch and compressed air control valve when the machine stops working, and avoid magnetic losses to the shaft barrel and parts. Wipe clean and perform oil maintenance of assembly table side slide parts and complicated precision parts on a regular basis, to prevent the impact of rusting accuracy. Attach great importance to environment and machine maintenance and keep the workshop environment clean all the time. Detect voltage and power before operation to avoid high or low voltage.
There are other methods about maintenance of spunbond nonwoven fabric machine, and you can find relevant information on the website, or find Wuxi Hail Roll Fone. Correct maintenance is very important for spunbond fabric making machine, and has large impacts on its service life and functions.
Post time: May-23-2022