Operating Precautions and Maintenance Methods Of Spunbond Non Woven Fabric Machine

When operating spunbond nonwoven fabrics machine, you should pay attention to the placement position and some details. Improper operation may damage the machine, or even cause serious accidents. Hail Roll Fone offers the following operating precautions for the spunbond non woven fabric machine, to help you correctly use the machine.

Where Should Not the Machine Be Placed?

It cannot be placed in non-horizontal position, in direct sunlight, in a place with an earthquake source, or near the air outlets of ventilation equipment and air conditioners.

Operating Precautions

1. Before use, check whether the spunbond nonwoven fabrics machine is faulty. If any fault is found, you should immediately respond to the relevant personnel. Check and adjust the conveying speed when the conveying motor is turned on, so as to ensure the machine can operate quickly.

2. During the the process of feeding, you should pay special attention to the loading range of the machine. If the loading range exceeds certain range, it is easy to damage the mechanical equipment.

3. When adding reagents to the non-woven spunbond fabric making machine, remember that the reagent water level cannot exceed the highest height of the machine. You should add water timely if the mechanical water tank level is lower than the suction height of the submersible pump.

Maintenance Methods

You should also check and maintain the spunbond non woven fabric machine frequently after operation, otherwise its components and parts will be worn out, leading to malfunctions. The following two maintenance methods are provided to you.

1. Routine maintenance. First, the main maintenance content is cleaning, tightening, adjustment, lubrication, and corrosion protection. Second, various maintenance tasks should be strictly performed according to the maintenance manual and maintenance procedures.

2. Regular maintenance. The first-level maintenance task should be completed on the basis of routine maintenance. The secondary maintenance focuses on inspection and adjustment.


Post time: Jun-13-2022

Send your message to us:

Write your message here and send it to us