25 years Spunlace Nonwoven Production Line Spunlace nonwoven machine Spunlace nonwoven making machine
a.Product Category:Plain, perforated fabric, jacquard, etc.
b.Product Specifications:Width (net width): Approx. 2.1m
Quantitative weight: 30-80 GSM
c.Speed and Capacity:For example (70%PET+30%VIS) 40GSM plain 70m/min 352kg/hr
d.Mesh, jacquard speed down properly
e.Power/heat source/capacity:
♦ Power supply power：380V/50HZ three-phase, operating power220V/50HZ(according to customer requirements depends on customers)
♦ Heat source heat source: natural gas heating or steam heating
♦ Transformer Transformer: 800KVA
Total installed power: approx. 1300kw, actual approx. 40-50%
Total Installation power:approx.:1300kw,actual 40-50%
| I. Project information | |
| Project location location | / |
| Raw material data and proportioningRaw material | Polyester PET1.5d×38mmViscose VISCOSE1.5~1.7d×38mm
Matching100% or or10-90% are both ok |
| Product CategoryProduct Category | Plain, perforated fabric, jacquard, etc. |
| Product useProduct Application |
1. All kinds of wet tissues: slice, barrel napkin, skin care, baby wipe, beauty towel, disinfection towel, home use, car use, pet use tissues, etc.; All kinds of wet tissues: slice, barrel napkin, skin care, baby wipe, Beauty towel,Disinfection towel, home use, car use, pet use tissues, etc. 2. Medical dressing: Gauze, bandage, surgical towel, etc. 3. Others: industrial and civil wiping materials, laundry color-absorbing and lint-absorbing sheets, disposable soft towels, etc. Others: Industrial and civil cleaning materials, laundry material, Disposable soft towel |
| Product SpecificationsProduct Specification | Width width (net width): Approx. 2.1mQuantitative weight: 30-80 GSM |
| Product requirements standardsProduct Standard | Domestic industry standard FZ/T64012.1-2013 Alevel
MD/CD 4-6:1 |
| Speed and Capacity ReferenceSpeed and Capacity | For example (70%PET+30%VIS) 40GSM plain 70m/min 352kg/hrMesh, jacquard speed down properly |
| Power/heat source/capacityPower/Heat/Volt |
u Power supply power：380V/50HZ three-phase, operating power220V/50HZ(according to customer requirements depends on customers) u Heat source heat source: natural gas heating or steam heating u Transformer Transformer: 800KVA Total installed power: approx. 1300kw, actual approx. 40-50% Total Installation power:approx.:1300kw,actual 40-50% |
| Water sources and dischargesWater source and discharge | Water source water source: hardness hardness 4-5°, PH value 7-9Circulation volume circulation150T/hr, make-up water flow supply5T/hr(automaticautomatic)
Discharge: waste water recycling project (customer care) COD≤80PPM BOD≤60PPM SS≤80PPM |
| Workshop environment requirementsWorkshop Environmental Requirement | Workshop temperature\humidity: 15-33℃, 65%±10%(customer care) Workshop temperature\humidity: 15-33℃65%± 10%(customer care) |
| Control methodControl Method | PLC HMI control PLC HMI controlFiber preparation system: 1 screen screen
carding system: 2 screens screen |
Wuxi Hai Roll Fone Science&technology Co.,ltd. is a leading enterprise of non -woven machinery technology in China, specializing in the development and manufacturing of non-woven machinery for 33 years. Feilong is the first manufacturer in china. Feilong spunlace line, which filled the gap in China, was rewarded national appraisal of scientific and technological achievement in 2000, and Feilong has supplied over 250 spunlace lines worldwidely since then. Feilong has 8 experimental production lines, to provide customers with design, manufacturing, installation, commissioning, training-whole package services.
Our customers are all over the world
1.Does one machine can only produce one size?
Not exactly, it depends on the machine.
2. Do you have after-sales support?
Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.
3. How to visit your company?
We can pick you up from Shanghai or Hangzhou airport. Or railway station Shaoxing North.
4. What can you do if the machine is broken?
Our machine's warranty period is 12months. if the broken parts can't repair, we can send the new parts to replace the broken parts, but you need to pay the express cost by yourself. if after the warranty period, we can through negotiation for solving the problems, and we supply the technical support for the whole life of the equipment.
5.Can you be responsible for transport?
Yes, please tell us the destination port or address. we have rich experience in transport. 6. 6.You are a trade company or factory?
We are a Manufacturer.
7. Why your price is higher than others?
As we persist on that each factory should put quality in the first place. We spend time and money on developing how to make machines much more automatic, accurate, and high quality. We can make sure that our machine could use more than 20 years without any problem.
8. Do you have overseas engineers?
Yes, we not only provide overseas engineers but also provide technical training.
9.Do you provide customized?
Sure, we can design the equipment according to the data of the structural section you provide. We are a professional sheet metal forming machine designer and manufacturer.
1.Does one machine can only produce one size?
Not exactly, it depends on the machine.
2. Do you have after-sales support?
Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.
3. How to visit your company?
We can pick you up from Shanghai or Hangzhou airport. Or railway station Shaoxing North. 4. What can you do if the machine is broken?
Our machine’s warranty period is 12months. if the broken parts can’t repair, we can send the new parts to replace the broken parts, but you need to pay the express cost by yourself. if after the warranty period, we can through negotiation for solving the problems, and we supply the technical support for the whole life of the equipment.
5.Can you be responsible for transport?
Yes, please tell us the destination port or address. we have rich experience in transport.
6. You are a trade company or factory?
We are a Manufacturer.
7.Why your price is higher than others?
As we persist on that each factory should put quality in the first place. We spend time and money on developing how to make machines much more automatic, accurate, and high quality. We can make sure that our machine could use more than 20 years without any problem.
8. Do you have overseas engineers?
Yes, we not only provide overseas engineers but also provide technical training.
9. Do you provide customized?
Sure, we can design the equipment according to the data of the structural section you provide. We are a professional sheet metal forming machine designer and manufacturer.
Send your message to us:
Products categories
-
25 years 3200mm S spunmelt nonwoven fabric maki...
-
Hot-selling automatic children face mask machine
-
Factory Price High Purity industrial oxygen gen...
-
Brand new melt-blown fabric making machine with...
-
Semi automatic face shield making machine/face ...
-
N95 fully automatic face masks making machine p...
